UNIVIEW NSW3000-24T1GT1GC-POE-IN 24 Port Cloud Management Switch

Model: NSW3000-24T1GT1GC-POE-IN

Ports Type: 24 x 10/100Mbps POE port (RJ45) + 1 x Gigabit port (RJ45) + 1 x Gigabit Combo

Standards: IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3ab, IEEE802.3x, IEEE802.3af, IEEE802.3at, IEEE802.3az

Switching capacity: 8.8 Gbps

Forwarding performance: 6.55Mpps

Packet Buffer: 4 M bit

MAC: 16K

Weight: 2.9kg

Dimensions (W×D×H): 440mm × 244.8mm × 44mm

PoE Standard: IEEE 802.3af, IEEE 802.3at

Max. PoE Power: Maximum total power 370W, Maximum PoE power for single port 30W

POE Mode: ModeA (1236), ModeB (4578)

Power Supply: AC 100 to 240V, 50/60Hz

Max. Power: 385W

Prior Ports: 1 to 8

Cooling Fans: 1

Operating Humidity: 5% to 90% RH, noncondensing

Operating Temperature: 0°C to 45°C (32°F to 113°F)

Power: Steady on (Normal power input), Off (Abnormal power input)

PoE: Off (The PoE port is not supplying power), Steady on (The PoE port is supplying power normally)

Link/Act: Off (Disconnected to the port), On (Connected to the port), Blinking (Transmitting data)

MAX: Off (The total PoE power is less than 80% of the total power of the device), Steady on (The total PoE power is higher than 85% of the total power of the device)

Ethernet: Supports full duplex, half duplex, auto-negotiation working modes, port auto-negotiation rate, port priority flow control, link aggregation group (consist of two uplink ports), port flow statistics, enabling/disabling ports

VLAN: Supports both access and trunk modes; allows up to 32 VLANs with IDs from 1 to 4095

MAC: Support (up to 16K); supports clearing the dynamic MAC address

POE: Allows to view PoE status and power; allows to enable/disable PoE power supply

Loop Detection: Loop Detection

QoS: Supports port rate limitation, broadcast storm control

Security: Supports port isolation (only for the downlink ports), locking login IP address (up to 64 addresses)

Supports N:1 port mirroring, unified software configuration/management/search, discovering connected video devices and generating a network topology, device upgrade, factory settings restoration, configuration import/export, logs export, device restart on the software.

Allows to view device name, model, serial number, current version, IP address, MAC address, DNS, operation time; allows editing IP address and device name; supports single-user management, user authentication, password modification, manual time configuration, NTP, viewing up to 32 other switches on same network, viewing up to 64 connected video devices

NDAA Compliant: Support