•Support IEEE802.3 at standard, compatible with IEEE802.3 af by electrical equipment (PD)
•Supports PoE Power up to 30W for each PoE port;
•Auto detect power device; will not burned non-standard PoE device or normal PoE switch;
•Supports port power supply prioritization, guarantee the continuous power supply of key nodes;
•Supports IEEE802.3 x full duplex flow control and Backpressure half duplex flow control;
•Line-speed forwarding, intelligent identification
•Supports storage – and- forward for Data exchange;
•Support RJ45 Auto-MDI/MDIX
Model: NSW2010-18GT2GP-POE-IN
Ports: 16×1000Mbps PoE ports (RJ45)+2×1000Mbps ports(RJ45)+2×1000Mbps ports(SFP)
Standards: IEEE802.3,IEEE802.3u,IEEE802.3z,IEEE802.3ab,IEEE802.3x,IEEE802.3af,IEEE802.3at,IEEE802.3az
Switching capacity: 40Gbps
Forwarding performance: 29.76Mpps
Packet Buffer: 4M bit
MAC: 8K
Dimensions (W×D×H): 280mm x 180mm x 44mm (11"×7.1"×1.7")
Weight: <4.2kg
Input Voltage: AC: 100-240V, 50/60Hz
MAX. Power: 200W
PoE: 802.3at/af,Mode A:1/2+,3/6-
Max. PoE Power: Max capacity: 185W, Max capacity for single port: 30W
Cooling Fans: 1
Operating Temperature: 0°C ~ 40 °C
Storage Temperature: -40 °C ~ 70 °C
Operating Humidity: 10% ~ 90% non-condensing
Storage Humidity: 5% ~ 90% non-condensing
Indicator: PWR(Green), LNK/ACT(Green), PoE(Orange)
Working Mode:
Default(Normal mode) : All ports can communicate with each other.
VLAN(Secure mode): Downlink ports can communicate only with uplink ports.
EXTEND(Surveillance mode): Transmission distance up to 250 meters. Downlink ports can communicate only with uplink ports.